SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: DESCRIPTION (2008 Sequoia)

Last Modified: 11-29-2007		1.6 C
Service Category: Vehicle Interior	Section: Supplemental Restraint Systems
Model Year: 2008	Model: Sequoia	Doc ID: RM000000YTI03MX
Title: SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: DESCRIPTION (2008 Sequoia)

DTC

B1000/31

Center Airbag Sensor Assembly Malfunction

DESCRIPTION

The center airbag sensor consists of the airbag sensor, the safing sensor, the drive circuit, the diagnosis circuit, the ignition control, etc.

If the center airbag sensor receives signals from the airbag sensor, it determines whether the SRS should be activated.

DTC B1000/31 is stored when a malfunction is detected in the center airbag sensor.

DTC Code	Detection Condition	Trouble Area
B1000/31	Center airbag sensor malfunction	Center airbag sensor assembly

HINT:

When a trouble code is output simultaneously with B1000/31, repair the malfunction indicated by the other code first.

1.	CHECK CENTER AIRBAG SENSOR

(a) Turn the ignition switch off.

(b) Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.

(d) Turn the ignition switch to ON, and wait for at least 60 seconds.

(f) Turn the ignition switch off.

(g) Turn the ignition switch to ON, and wait for at least 60 seconds.

(h) Check for DTCs .

OK:

DTC B1000/31 is not output.